Hikvision Doorbell Video Intercom Door Station Easy Install Kit

This Hikvision Doorbell kit has all the parts needed to get you going on your doorbell installation. Including the doorbell cables and poe ethernet switch.

With the Hikvision doorbell you don't have to pay ongoing storage fees or charge your battery every few months.

The doorbell connects back to a network switch (included) which powers the doorbell and transfers data back to your mobile, see our basic setup guide to get you going.

Key Features

• 2 way voice, converse with your visitor anywhere in the world
• View from anywhere worldwide
• Hardwired directly no charging needed
• No subscription charges!
• Save photos and videos directly to a mobile phone
• Includes everything to get you up and running

Parts Included

1x Doorbell

1x 4 Port Poe Ethernet Swtich

1x 20m Ethernet Cable

Model:  Doorbell DS-KV6113-WPE1-C and POE Switch DS-3E1105P-EI 
Part Number:  DS-KV6113-WPE1(C) + DS-3E1105P-EI
Brand:  HIKVISION

Basic Install Guide

Plug the supplied 20m Ethernet cable into the back the Hikvision doorbell, then plug it into the supplied (POE) network switch in turn the network switch needs to plugged into your current internet router/switch with a smaller ethernet cable (not supplied)

Download and install the SADP tool

Open the SADP tool and activate the doorbell, it will show as inactive (note: if connecting to an Hikvision NVR use the camera activation password you have used on the NVR)

Once activated Enable DHCP in the SADP tool by click the DHCP button then inserting the password just set and clicking modify, this will allow the doorbell to pickup an IP address from your existing router.

Now we need to login to the GUI using the IP Address just set by typing said IP address into a browser i.e 192.168.1.100 the hikvisoon doorbell login page should now open, you need to login using admin as the username and then password set as above.

You should now be presented with the live view of the doorbell. We need to click the configuration tab and then on the left hand side there is a tab that says network, click this then we want advanced and then a heading tab that says platform access, we need to enable Hik connect and enter an encryption key then click save

We now need to download the Hik Connect app from your phones app store and register an account. Once this task is completed we need to add the doorbell by scanning the QR code, this can be done by pressing the the + button on the top right of the screen.

Once done press the call button on the doorbell and test the device is calling the mobile.